GENERAL BLUETOOTH PAIRING INSTRUCTIONS
Power on the headphones and enter Pairing Mode by holding the middle, multi-function button down (play/pause/power) for at least 8 to 10 seconds. DO NOT LET GO WHEN YOUR HEAR "Power On."
Hold the middle button until you hear "Pairing."
A red & blue LED light will flash once in Pairing Mode.
Turn on the Bluetooth function of your desired device. Scan until you see "HIFI ELITE" & select it.
If done correctly, you will hear "Paired."
Once a device is connected, the headphones will automatically connect when powered on as long as the device has Bluetooth enabled and is within range.
Your television must be Bluetooth enabled or have the ability to use an external Bluetooth Transmitter (sold separately) in order to connect with any Bluetooth devices including the HIFI ELITE Super 66 Headphones.
Pairing a TV with the HIFI ELITE Super 66 Heaphones follows the same process as outlined above. Please refer to your TV manual for instructions on operating the Bluetooth of your specific TV model.
Use above instructions to put HIFI ELITE Super 66 Headphones into Pairing Mode.
On your Apple TV, go to Settings > Remotes and Devices > Bluetooth. ...
Choose your Bluetooth accessory.
If asked, enter a passkey or PIN. Use: 0000
If you are still unable to pair your HIFI Elite Super 66 with your Apple TV please visit https://support.apple.com/en-us/HT205302 for further instructions & support from an Apple TV expert.